Products
New Products
-
1.2mm Nylon Cover for Hydraulic Hose Protection Sleeve
-
Aerospace-Grade PEEK Aramid Self-Wrapping Composite Sleeving
-
Expandable Polyester Braided Sleeving in Dispenser Box Packaging
-
-
-
-
-
-
-
-
-
Hydraulic Hose Protector Spiral Cable Wrap
E-FLEX® Hydraulic Hose Sheathing made of HDPP(high-density polypropylene), can withstand the extremes of climate and operating conditions. Is an economical and convenient way to protect and extend the life of hydraulic and pneumatic hoses, cables, wires, and rope from premature wear. Hydraulic hose wrap has exceptional anti-crushing performance, stress cracking resistance, and load-bearing strength. Which greatly extends the working life of hydraulic hoses.
| Part No.: | HPS-HDPE-SX-CS |
|---|---|
| Material: | High Density Polyethylene(HDPE) |
| Working Temperature: | -50℃ to 100℃ |
| Flammability: | Non-Flame Retardant |
| Standard Color: | Black |
| Certification: | RoHS |
| Cutting Tool: | Hot Knife |
Hydraulic Hose Protector Spiral Cable Wrap
E-FLEX® Hydraulic Hose Protector spiral cable wrap is engineered from High-Density Polypropylene (HDPP) to provide a robust barrier against harsh environments. This spiral wrap shields your equipment from abrasion caused by dirt, rocks, and dust, while offering exceptional resistance to oils, UV rays, and solvents. By utilizing this spiral cable wrap, you can dramatically reduce the likelihood of hose failure and significantly extend the operational lifespan of your critical components.
Designed for maximum efficiency, this Hydraulic Hose Protector can be installed easily without the need to remove connectors or terminals. Its self-lubricating spiral design allows for seamless on-site fitting over existing rubber hoses, pipes, and cables, providing an effortless cable management solution that minimizes friction and wear.
Physical Properties
| Material | High Density Polyethylene (HDPE) |
| Working Temperature | -50℃ ~ +100℃ |
| Tensile Strength | ≥ 25 Mpa at room temperature; ≥ 30 Mpa at -40℃ for 24H |
| Impact Strength | Conforms to GB/T 2411-1843 |
| Flammability | Non-Flame Retardant |
| Abrasion Resistance | Apply a load of 5N to rub the product by 100 turns, then abrade it by abrasive wheel H-18. The weight loss is less than 2mg after abrasion. |
| Oil Resistance | Use gasoline 93# and methylbenzene mixture to scrub the surface of the product for 5 minutes, specimen is without color-changing or clamminess phenomenon. |
| Low and High Temperature Resistance | 80℃ × 1H → Room temperature × 0.5H → -40℃ × 1H → Room temperature × 0.5H, as 1 circulation; The specimen is without deformation, cracking, clamminess or sinking after 5 circulations. |
| Color | Black |
| Certification | RoHS |
| Cutting Tool | Hot Knife |
Specification
| Part No. | ID (mm) | OD (mm) | Wall Thickness (mm) | Screw Pitch (mm) | Bundle Dia (mm) | Packing (m/spool) |
|---|---|---|---|---|---|---|
| HPS-HDPE-SX-008-BK-CS | 8 | 11 | 1.5 | 10 | 8~12 | 2/20/50/100/200 |
| HPS-HDPE-SX-010-BK-CS | 10 | 12.8 | 1.4 | 11 | 10~14 | 2/20/50/100/200 |
| HPS-HDPE-SX-012-BK-CS | 12 | 15 | 1.5 | 12 | 12~16 | 2/20/50/100/200 |
| HPS-HDPE-SX-014-BK-CS | 14 | 17 | 1.5 | 13 | 14~18 | 2/20/50/100/200 |
| HPS-HDPE-SX-016-BK-CS | 16 | 19.6 | 1.8 | 15 | 16~20 | 2/20/50/100/200 |
| HPS-HDPE-SX-018-BK-CS | 18 | 21.6 | 1.8 | 16 | 18~22 | 2/20/50/100 |
| HPS-HDPE-SX-020-BK-CS | 20 | 24 | 2 | 18 | 20~24 | 2/20/50/100 |
| HPS-HDPE-SX-021-BK-CS | 21 | 25 | 2 | 18 | 21~25 | 2/20/50/100 |
| HPS-HDPE-SX-022-BK-CS | 22 | 26 | 2 | 18 | 22~25 | 2/20/50/100 |
| HPS-HDPE-SX-023-BK-CS | 23 | 27 | 2 | 19.2 | 23~28 | 2/20/50/100/150 |
| HPS-HDPE-SX-024-BK-CS | 24 | 28 | 2 | 21 | 24~28 | 2/20/50/100/150 |
| HPS-HDPE-SX-025-BK-CS | 25 | 29.8 | 2.4 | 21.5 | 25~30 | 2/20/50/100/150 |
| HPS-HDPE-SX-028-BK-CS | 28 | 33.2 | 2.6 | 23 | 28~32 | 2/20/50/100/150 |
| HPS-HDPE-SX-030-BK-CS | 30 | 34.8 | 2.4 | 22.5 | 30~35 | 2/20/50/100 |
| HPS-HDPE-SX-032-BK-CS | 32 | 37.6 | 2.8 | 23 | 32~38 | 2/20/50/100 |
| HPS-HDPE-SX-035-BK-CS | 35 | 40.6 | 2.8 | 24 | 35~40 | 2/20/50/100 |
| HPS-HDPE-SX-038-BK-CS | 38 | 44 | 3 | 25 | 38~43 | 2/20/50/100 |
| HPS-HDPE-SX-040-BK-CS | 40 | 47 | 3.5 | 27 | 40~45 | 2/20/50 |
| HPS-HDPE-SX-042-BK-CS | 42 | 49 | 3.5 | 25 | 42~48 | 2/20/50 |
| HPS-HDPE-SX-045-BK-CS | 45 | 53 | 4 | 28 | 45~50 | 2/20/50 |
| HPS-HDPE-SX-048-BK-CS | 48 | 56 | 4 | 28 | 48~52 | 2/20/50 |
| HPS-HDPE-SX-050-BK-CS | 50 | 59 | 4.5 | 29 | 50~55 | 2/20/50 |
| HPS-HDPE-SX-052-BK-CS | 52 | 61 | 4.5 | 29 | 52~58 | 2/20/50 |
| HPS-HDPE-SX-055-BK-CS | 55 | 64 | 4.5 | 30 | 55~60 | 2/20/50 |
| HPS-HDPE-SX-060-BK-CS | 60 | 69 | 4.5 | 30 | 60~65 | 2/20/50 |
| HPS-HDPE-SX-063-BK-CS | 63 | 72 | 4.5 | 30 | 63~68 | 2/20/50 |
| HPS-HDPE-SX-065-BK-CS | 65 | 74 | 4.5 | 30 | 65~70 | 2/20/50 |
| HPS-HDPE-SX-067-BK-CS | 67 | 76 | 4.5 | 30 | 67~72 | 2/10/20 |
| HPS-HDPE-SX-070-BK-CS | 70 | 79 | 4.5 | 34 | 70~75 | 2/10/20 |
| HPS-HDPE-SX-074-BK-CS | 74 | 84 | 5 | 34 | 74~80 | 2/10 |
| HPS-HDPE-SX-075-BK-CS | 75 | 85 | 5 | 42 | 75~78 | 2/10 |
| HPS-HDPE-SX-080-BK-CS | 80 | 91 | 5.5 | 45 | 80~85 | 2/10 |
| HPS-HDPE-SX-088-BK-CS | 88 | 99 | 5.5 | 45 | 88~95 | 2/10 |
| HPS-HDPE-SX-090-BK-CS | 90 | 101 | 5.5 | 45 | 90~97 | 2/10 |
| HPS-HDPE-SX-100-BK-CS | 100 | 112 | 6 | 50 | 100~110 | 2/10 |
| HPS-HDPE-SX-150-BK-CS | 150 | 162 | 6 | 38 | 150~180 | 2 |
| HPS-HDPE-SX-200-BK-CS | 200 | 210 | 5 | 50 | 200~300 | 2 |
Application
The Hydraulic Spiral hose guard is the ideal safety guard for demanding sectors, including:
- Mining & Construction: Heavy-duty equipment protection.
- Forestry & Agriculture: Shielding lines from rugged outdoor debris.
- Trucking & Automotive: Organizing and safeguarding complex wire harnesses.
- Manufacturing: Streamlining industrial hose and cable management.