MJ FLEX BRS-PET-FR is an expandable PET braided sleeve for cable assemblies that specify VW-1 flame performance. It combines a flame-retardant PET construction with connector pass-through, abrasion protection and flexible routing for electrical equipment, cabinets and general industrial harnesses. The applicable report should be reviewed against the exact ordered construction.

MJ FLEX BRS-PET-FR-V0 is an expandable PET braided sleeve developed for wire harnesses that require UL 94 V-0 material flammability performance for the referenced construction. It combines connector pass-through, flexible abrasion protection and organized cable routing with a clearly defined flame-retardant selection basis for electrical and electronic equipment.

MJ FLEX BRS-PET-CLR is a colored expandable PET braid that combines cable protection with visual identification. It helps separate circuits, match equipment colors and improve harness recognition while retaining the flexibility, connector pass-through and abrasion protection of general PET braided sleeving. Color feasibility and minimum order depend on yarn and production requirements.

MJ FLEX BRS-PA66 is braided from polyamide 66 monofilament for wire harnesses that need a strong combination of abrasion resistance, mechanical durability and higher thermal capability than general PET or standard PA6 constructions. Its expandable braid supports installation over connectors while maintaining flexible coverage around complex industrial cable bundles.

MJ FLEX SBW-PET-FR-V0 combines a serviceable split-braid design with flame-retardant PET material developed to meet UL 94 V-0 performance for the referenced construction. It installs around assembled wire bundles and is intended for electrical and electronic equipment where material flammability is a defined selection requirement.

MJ FLEX MBS-TC is an expandable sleeve braided from tinned copper wires for cable shielding and grounding applications. The conductive metal braid fits over cables, wire bundles and selected connectors to create a flexible shielding layer. Tin plating helps protect the copper surface against oxidation and improves solderability, making this construction suitable for industrial, electronic and vehicle electrical systems that require reliable shield termination.

MJ FLEX MBS-CFW is a lightweight expandable shielding sleeve braided with conductive copper foil filaments. It forms a flexible conductive layer around cables and wire bundles while adding less bulk than many conventional solid-wire metal braids. The construction is designed for signal wiring, electronics and space-conscious harnesses that need EMI shielding together with easy routing and a softer, more textile-like handling profile.

MJ FLEX MBS-CFW-S is a self-closing split shielding sleeve braided with conductive copper foil filaments. Its side-entry construction wraps around installed cables without removing connectors, while the lightweight braid follows bends and changing bundle profiles. It is designed for serviceable signal harnesses that need conductive coverage with less weight and stiffness than a conventional solid-wire metal braid.

MJ FLEX MBS-TC-S is an openable shielding sleeve using a tinned copper braided construction with self-closing overlap. It provides side-entry installation around completed cable assemblies and a conductive metal layer for EMI control and shield bonding. Tin plating helps protect the copper surface against oxidation and supports solderable or mechanically clamped terminations.

MJ FLEX VEW-PVT is a reusable EMI cable shielding wrap with a full-length hook-and-loop closure. It opens flat for fast installation around terminated cables, then reseals to provide conductive coverage and cable containment. The construction is suited to equipment that requires frequent access, cable changes or temporary shielding during development and maintenance.

MJ FLEX VEW-PZP is a reusable EMI shielding wrap with a full-length zipper closure. It installs from the side around terminated cables and closes into a secure, defined sleeve profile. The construction is intended for cable systems that need shielding coverage, positive mechanical closure and planned access for inspection or cable replacement.

MJ FLEX BRS-PPS is an expandable cable sleeve braided from polyphenylene sulfide monofilament. PPS provides a balanced combination of thermal stability, chemical resistance, dimensional control and electrical performance for cable systems exposed to heat, fluids and demanding industrial environments.

MJ FLEX BRS-PEEK is a premium expandable sleeve braided from polyether ether ketone monofilament. PEEK combines high-temperature capability with mechanical toughness, wear resistance, low moisture uptake and broad chemical resistance. It is intended for high-reliability cable protection where conventional engineering plastics cannot meet the environment.

MJ FLEX BRS-KV is a lightweight braided sleeve made from para-aramid fiber for cable and hose protection where high tensile strength, cut resistance and low weight are priorities. The textile braid protects vulnerable jackets from sharp edges and mechanical damage while remaining flexible around complex assemblies.

MJ FLEX BRS-NM is a textile cable sleeve braided from meta-aramid fiber for applications that prioritize heat resistance, inherent flame resistance and electrical insulation. The flexible braid protects wiring near hot equipment and supports cable organization in aerospace, electrical and transportation systems.